Thermal labels are blank labels printed by the heat of a thermal printhead, either directly on a heat-sensitive face (direct thermal) or through an ink ribbon (thermal transfer). Shippers, warehouses, manufacturers, healthcare providers and retailers use them for shipping labels, barcodes, product labels and inventory labels on Zebra, Datamax and Sato printers. Smith Corona makes these labels and sells them factory-direct at wholesale prices. Choose from more than 280 sizes and formats, in rolls on 0.75", 1" and 3" cores or fanfold stacks, in paper, polypropylene and 16 colors.
If you are unsure which side is your label's width, just look at how it exits your printer.
The green arrows indicate the width of your label.
If you are unsure which side is your label's length, just look at how it exits your printer.
The green arrows indicate the length of your label.
Loading
We can make just about any shape,
size, and material combination you might need. Request a quote today to get
started!
Thermal transfer printing uses a ribbon. A heated printhead melts pigment from the ribbon onto the label, producing an image that resists heat, light, moisture, chemicals, and abrasion. Direct thermal printing uses no ribbon; the label stock itself is heat-sensitive and darkens where the printhead touches it. Direct thermal is simpler to run, but the image fades with exposure to heat, sunlight, and friction. Thermal transfer labels hold their printed image for years in service; direct thermal labels are generally rated 6 to 12 months.
Only for thermal transfer labels. Direct thermal labels print without a ribbon, and running a ribbon over them can distort the print.
Scratch a blank area of the label quickly and firmly with a fingernail. A dark mark means direct thermal; no mark means thermal transfer. Top-coated direct thermal labels may need a harder strike. If your printer has a ribbon loaded, it is set up for thermal transfer.
Yes. Direct thermal is the standard for shipping labels because the label only has to stay scannable until delivery, and it needs no ribbon.
No. Thermal transfer labels have no heat-sensitive coating, so a direct thermal printer will run them through and produce a blank label. Thermal transfer labels require a printer with a ribbon carriage.
Thermal transfer. Printed direct thermal labels typically last about 6 to 12 months indoors, less in heat or sunlight. Thermal transfer prints last a year or more depending on material and ribbon.
Match the core size to your printer. Desktop printers use 1" cores, industrial printers use 3" cores, and mobile printers use 0.75" cores. Check the label core spec in your printer's manual before ordering.
Roll OD is the outside diameter of the full label roll. A roll can have the right label size and core and still not fit if its OD is larger than the printer's media compartment, which is usually 5" on desktop printers and 8" on industrial printers.
Width is the measurement across the printer, side to side; length is the measurement in the direction the label feeds out. A 4" x 2" label is 4" wide; a 2" x 4" label is 2" wide.
Fanfold stacks hold more labels per pack, load from the rear of most printers and are not limited by core size or roll OD. Rolls suit printers without a rear feed slot and applicators. Both print the same.
2-up labels have two labels side by side across the liner, so the printer prints two per row. Your label software must be set to a two-across layout.
Perforated labels tear apart easily for hand application. Non-perforated labels are for print-and-apply machines and rewinders, where perforations can tear the liner and cause jams.
Smith Corona's direct thermal labels come in white paper, top-coated paper and polypropylene. Thermal transfer labels come in paper and polypropylene.
Polypropylene thermal labels are water-resistant. Standard paper thermal labels are not.
Freezer Grade adhesive, rated from -40°F to 32°F. General Purpose adhesive is rated only down to 32°F.
Yes. Smith Corona direct thermal and thermal transfer labels are made on phenol-free facestock, so they contain no BPA, BPS or other phenol developers. Many thermal papers use BPA or BPS in their heat-sensitive coating.
Match the ribbon to the label material: wax for paper labels, wax-resin for paper that needs more smudge resistance and for polypropylene labels in everyday use, and resin for polypropylene and other synthetic labels exposed to chemicals, heat or outdoor conditions. The ribbon must be at least as wide as the label; 4" labels usually run with a 4.33" ribbon.
Paper thermal labels on corrugated boxes generally go through cardboard recycling with the box. Release liners and polypropylene labels require separate handling. Check local recycling rules.
Labels on a 1" core with a roll OD of 5" or less, up to 4.25" wide. For example, the Zebra ZD421, ZD621 and GK420d.
Labels on a 3" core with a roll OD of 8" or less. For example, the Zebra ZT230, ZT231 and ZT411.
No standard desktop or industrial printer holds a 12" OD roll internally. 12" OD rolls are for print-and-apply systems and printers with external unwinders.
It depends on the printer. Zebra printers typically use coated side out ribbons; Datamax and Sato printers most often use coated side in. To check a ribbon, press tape against the outside of the roll: if ink comes off, it is coated side out.
The media sensor isn't reading the gap between labels. Set the media type to gap for die-cut labels, line the sensor up with the gap, and run the printer's media calibration. Calibrate again every time you change label size.
The most common causes are thermal transfer labels loaded with no ribbon, a ribbon wound the wrong way so the ink faces away from the label, or a printer set to the wrong print method. Check the scratch test, the ribbon and the print method setting.
Heat, direct sunlight and some chemicals darken or fade direct thermal labels, and some acrylic-based sealing tapes speed up fading. Switch to thermal transfer labels for anything that must stay readable long-term.
The ribbon doesn't match the label material. Wax ribbon on polypropylene smears; use wax-resin or resin on synthetic labels.
The roll OD is larger than the printer allows, or the core is the wrong size. Desktop printers usually take up to 5" OD on a 1" core; industrial printers take up to 8" OD on a 3" core.
Yes. Smith Corona manufactures thermal labels and sells them factory-direct by the case at wholesale prices, with no distributor markup.
Buying the wrong core size, buying rolls with a roll OD too large for the printer, buying thermal transfer labels for a direct-thermal-only printer, buying ribbon for direct thermal labels, ordering the wrong ribbon wind (coated side in vs. out), and swapping width and length.
The minimum order for stock thermal labels is one case. Made-to-order sizes and colors typically carry a minimum of 15 cases or $1,500.
Stock thermal label orders placed by 4:00 PM EST ship the same business day from Smith Corona's Cleveland, Ohio facility. Custom and made-to-order sizes ship in three to four weeks.
No. Smith Corona does not offer free shipping on labels or ribbons; shipping is calculated at checkout. See the Smith Corona shipping policy.
Yes. Larger orders ship LTL freight, which is usually cheaper per case than UPS or FedEx Ground and arrives palletized and shrink-wrapped. As a rule of thumb, orders over 15 cases qualify. Shipping options, including LTL, are shown at checkout. If you're not sure your order qualifies, use the Estimate Shipping button on the product page or in your cart.
Yes. Provide your UPS or FedEx account number, or a customer-provided BOL for LTL-sized orders.
Yes. Email support@smithcorona.com and Smith Corona will send you a copy of its W9.
Please create an account and email your certificate to Smith Corona before you place your first order. Smith Corona will confirm that everything is all set and that you are clear to proceed.
Smith Corona accepts Visa, Mastercard, American Express, Discover and PayPal. Net 30 terms are available to creditworthy businesses: create an account, then email a purchase order to po@smithcorona.com with your billing address, shipping address and accounts payable contact. Once approved, you can enter a PO number at checkout instead of a card. See Net 30 terms.
Yes. Smith Corona provides free samples of any stock label, including free shipping. Request the exact size and material you need from its individual product page. Smith Corona sends that item, or the closest available equivalent if it is out of stock, within one to two business days.
“We've been using Smith Corona’s 4x3 White Direct Thermal Labels (1" core) for many years. We use them with our Zebra Thermal Printer to print carton and other shipping labels. Dependable Supplier!”
“These labels are wonderful. The thickness and quality are great. No ripped labels in the middle of the box and the labels peel off very easily. Will 100% be purchasing again once our stock is depleted!”
“This was the best price we have ever found. And the shipping was really fast. We will be ordering from this company again! Customer service on the phone was very helpful.”
“The site is easy to order on, the prices are competitive, the delivery is quick and the quality of the product is exemplary. All this makes for a very happy customer!!”
“These work perfectly for our application. Quality is just as good as the manufacture. We will be purchasing from Smith Corona again.”
“The ordering and shipping process was fast and easy. Delivery was on time and the experience was seamless. The labels were perfectly packaged and ready for use with no damages upon arrival.”
Optimize inventory and efficiency with pre-printed LPN labels for accurate warehouse management.
Shop Now
Prioritize safety and streamline operations with pre-printed battery labels that identify dangerous goods
Shop Now
Elevate your packaging with our custom roll labels, tailored exactly to your specifications for a perfect fit.
Shop Now
Our sheet labels come in a variety of sizes and materials, compatible with printers for clear, professional labeling.
Shop NowOne of our experts will be in touch shortly! If you have any immediate questions, you can always call us Monday through Friday (9:00 AM EST to 5:00PM) at 800-875-7000